Assembly Guide - 3D TexFrame

Assembly Guide - 3D TexFrame

This guide will provide you with the knowledge required to assemble our 3D TexFrames - in this instance we'll be using a 700mm x 700mm x 700mm cube to demonstrate this.

When you purchase a TexFrame system from us all that you need will be supplied! For each cube display there will be:

  • 12 x 3D extrusion lengths (cut to the size you require)
  • 8 x 3D extrusion corners
  • 1 x alen key

TexFrame 3D Product

 


 

Step 1:

To begin; lay out one side of the cube as we have done.

3D TexFrame Assembly Top View

It's worth noting that the corners and the straight lengths can only be assembled one way.

3D TexFrame Extrusion Corner Profile

Step 2:

Slide the corners into a section of the extrusion, use the supplied alen key to tighten the grubs.

(Each join has 2 grubs that need to be tightened.)

3D TexFrame Corner Assembly

Step 3:

Repeat the above step for the opposite end of the same piece of extrusion, so that you have formed a U shape.

3D TexFrame Corner Assembly

Step 4:

Attach the two remaining corners to the last piece of extrusion. 

 

Step 5:

Once they are attached slide both corners into the U shape & tighten the grubs to complete the side.

3D TexFrame Final Corner Assembly

Step 6:

Repeat the above process to complete the second side of the cube.

3D TexFrame Section Complete

Step 7:

Attach the remaining 4 pieces of extrusion to the corners, tightening all grubs as you go.

3D TexFrame Upright Section Complete

Step 8:

Take the second, completed, side and attach its corners to the vertical pieces of extrusion.

Again, tightening all grubs.

You've made a cube!

3D TexFrame Frame Complete

3D TexFrame Complete

Related Articles

Assembly Guide - Fitting Fabric Graphic to TexFrame
This guide will provide you with the knowledge required to affix your fabric graphic to an assembled TexFrame. While there are differences between the profiles of our extrusions the method used to insert the printed fabric graphic is extremely similar for all of them, so we've grouped them to make things easier (the frame used in this case was a 3D TexFrame). Inserting a fabric graphic into extrusion is fairly straightforward, however like most things, it does get easier with experience. If at any time you find that you're not happy with your progress/finished pr..
Latest Articles - All Articles
August 2017 eNews

Welcome to the August 2017 Newsletter 

Dear Customer,

It is the wish of all exhibitors to attract more visitors to their booths at exhibitions and trade shows. An ideal way for visitors to see you is to have your name or brand visible from anywhere on the exhibition floor.

In this issue of eNews, we will show you our Overhead/Rigging display solutions. We have a number of designs that can be built to be attractive, easy to use and impactful.

- Be seen from anywhere on the exhibition floor.

T-FPU (TexFrame Fabric Pop-Up) Backlit Display offers an easy and light weight standard fabric display with a portable giant lightbox feature.

Save money and time on setup and dismantling while generating great visual impact for your brand and message.

Ideal solution for exhibition display and event backdrop.

Articles Menu

Contact Us

02 8518 1950
02 9533 3881
sales@adidisplays.com.au

Twitter

Facebook